A real in-home measure
We laser-measure every room, check your subfloor for moisture with a meter, and note the height of every door and appliance. The number we give you is the number you pay — no "site conditions" surprise on day two.
Supply & Installation · Fairfield County
Floors chosen in daylight, laid by hand.
We are a family flooring house, not a warehouse. Come sit with real boards under a north window, take five samples home for a week, and let our own installers — never a rotating sub crew — set them over a subfloor we have properly flattened. Hardwood, luxury vinyl plank, porcelain tile and carpet.
Free in-home measure — no charge, no obligation
or call (888) 555-0142
On the floor above
Ashfield Wide-Plank Oak
White oak, 7½ in. plank · 4 mm wear layer · wire-brushed matte finish
$11.40 / sq ft installed
The swatch table
Six materials. Pick one up and see where it belongs.
This is the same conversation we have at the showroom table, minus the drive. Choose a material to see a finished room in it and the honest specification behind it — what it shrugs off, what it doesn't, and what it costs installed.
Ashfield Solid Oak — sitting room, Ridgefield
Specification
Solid Oak
The floor your grandchildren will refinish rather than replace. Sanded and finished in place, so every board meets the next without a bevel to trap grit.
- Best for
- Living, dining, bedrooms, halls
- Durability
- Very high
- Water resistance
- Low — keep off baths & basements
- Installed price
- $9.00 – $14.00 / sq ft
- Warranty
- 25-yr finish · lifetime install
Send me this sample
In stock — 4 finishes
Recently finished
Rooms we handed back this season.
Every one measured, prepped and installed by our own crew across Fairfield and Litchfield counties.
French-cut oak herringbone
Entry hall · Westport
Engineered white oak, matte
Living room · Newtown
Luxury vinyl plank, 20 mil
Kitchen · Bethel
Chequered porcelain, honed
Primary bath · Redding
Wool-blend loop carpet
Bedroom · Danbury
American walnut, oiled
Sitting room · Ridgefield
Reclaimed oak block parquet
Study · New Milford
Why homeowners hire us twice
The parts of a floor you never see are the parts that fail.
Dust-contained sanding
Our sanders run to a sealed vacuum unit parked outside, with zip-wall barriers at every doorway. Refinish a floor with us and you will not be wiping fine oak dust off bookshelves in March.
Subfloor prep done right
Nine out of ten "bad floors" we are called to rescue are bad subfloors. We flatten to within 3/16 in. over 10 ft, refasten squeaks, and pour self-levelling compound where it is needed — before a single plank is opened.
Lifetime installation warranty
For as long as you own the home, if our workmanship moves, cups at a seam or squeaks where it shouldn't, we come back and make it right. Written on the invoice, not buried in a brochure.
Twenty-one years, 3,400 homes, one crew list.
From first call to final walkthrough
Five steps, and you always know which one you are in.
-
Consultation
Twenty minutes on the phone or at the showroom table. We ask about pets, kids, sunlight, radiant heat and how long you plan to stay — because those five answers rule out half the catalogue before you look at a single board.
-
In-home measure
Free, usually within four working days. We laser every room, moisture-test the subfloor and slab, check door clearances and transitions, and photograph anything that will need attention. You get a fixed written quote by email within 48 hours.
-
Samples at home
Five large samples, free, kept for a week. Showroom light lies. Lay them by the window in the morning and next to the lamp at night, walk on them barefoot, and put a chair leg on the one you love. Nobody has ever regretted this step.
-
Installation
Material acclimatises in your home first — five to seven days for solid wood. Then our own installers arrive with floor protection, dust barriers and a written day-by-day plan. A typical 900 sq ft floor takes three to five days including prep.
-
Final walkthrough
We walk the whole floor with you on hands and knees if that is what it takes, list anything you want touched, and don't invoice the balance until that list is empty. You leave with a care card, the cure schedule and spare boards from the same run.
No charge, no salesperson
Five samples, sent to your house, kept for a week.
Choosing a floor from a two-inch chip under fluorescent light is how people end up living with a colour they never wanted. Tell us roughly what you're after and we'll post five generous samples — real boards, real tile, real carpet — so you can see them in your own light before you commit a cent.
Installed price guidance
What floors actually cost, before anyone visits.
These are honest installed ranges — material, underlayment, labour, trim and haul-away of the old floor. Where you land inside a range depends on three things: how flat your subfloor is, how many square feet you are doing at once, and how many doorways, stair nosings and closets break the run up. Small jobs sit near the top of the range; open plans sit near the bottom.
| Material | Installed / sq ft | Typical lifespan | Best rooms |
|---|---|---|---|
| Solid oak, site-finished | $9.00 – $14.00 | 50–100 yrs (3–4 refinishes) | Living, dining, bedrooms, halls |
| American walnut & specialty species | $13.00 – $20.00 | 50–100 yrs | Studies, sitting rooms, feature spaces |
| Engineered hardwood, 4 mm wear layer | $8.00 – $13.00 | 25–40 yrs (1–2 refinishes) | Whole floors over slab or radiant heat |
| Luxury vinyl plank, 20 mil | $5.50 – $9.00 | 15–25 yrs | Kitchens, mudrooms, basements, rentals |
| Porcelain tile, standard format | $11.00 – $18.00 | 50+ yrs | Baths, entries, laundry, sunrooms |
| Wool-blend carpet with 8 lb pad | $4.50 – $8.00 | 8–15 yrs | Bedrooms, stairs, playrooms, offices |
| Refinish existing hardwood (dust-contained) | $3.75 – $5.50 | Adds 10–20 yrs | Any solid or thick-veneer wood floor |
Stairs are priced per tread $95–$180 a tread depending on species and whether we wrap the riser. We always quote them separately so the number is clear.
Levelling is quoted, not assumed If your subfloor needs compound we tell you at the measure and price it by the bag — never as a mystery line item after demolition.
Over 1,200 sq ft? Larger continuous runs cut our per-foot labour, and we pass that on. Ask about the whole-floor rate when you call (888) 555-0142.
From the homes we finished
Two customers, in their own words.
“Two contractors told us our 1962 subfloor was fine. Hearth & Grain put a straightedge on it, showed us a half-inch dip running the length of the hall, and levelled it before laying a board. Eighteen months of two labradors later there is not one squeak or gap.”
Marguerite & Tom Ballard
1,150 sq ft white oak · Ridgefield
“I wanted hardwood in a kitchen with three children and a dishwasher that had already flooded once. They talked me out of it — sold me a 20-mil vinyl plank for less money instead. Who does that? It has taken a dropped cast-iron pan without a mark.”
Ada Okonkwo
640 sq ft LVP, kitchen & mudroom · Bethel
Book your free measure
Tell us about the room. We'll bring the tape.
Send this and one of us — not a call centre — will ring you back the same working day to find a measure slot, usually within four days. There is no charge for the visit and no obligation after the quote lands in your inbox.
- Call the showroom
- (888) 555-0142
- [email protected]
- Showroom
- 218 Millwright Row
Brookfield, CT 06804 - Hours
- Mon–Fri 9:00–6:00
Sat 10:00–4:00 · Sun closed
Serving Fairfield and Litchfield counties: Brookfield, Danbury, Bethel, Newtown, Ridgefield, Redding, New Milford, Westport and surrounding towns.